Monday, June 1, 2009

Pedal Grinder

A hundred years ago very worthwhile piece of equipment for a farmer to own was a pedal grinder. It could be use to sharpen everything needing sharpening from sickle blades to butcher knives. When my grandfather Sorenson passed away, I was fortunate enough to inherit his grinder. He use to keep it out in the yard under the apple tree, and all us kids use to take turns pedaling it. It seemed worthy to build a model of, and so just yesterday I completed a 1/8th scale model of it.

Wooden Lock

A couple weeks ago I completed a working lock, built entirely out of wood and glue, for no reason other than just doing it.

Fill In Engine

I had a desire for some kind of different project, and I happened across a web site in England that had instructions for building a little hand cranked box organ. After watching and listening to a number of videos of various ones playing, I placed an order for a set of instructions. But as anyone knows who has ordered anything from across the ocean, it takes time to get here. So while I was waiting I put together this little vertical engine. It did not take much because I was able to use a left over steam cylinder from the steam shovel and the flywheel is a spare belt pulley from the sawmill. It is intriguing, because it has rather different straight line motion linkage that eliminates the need for a cross head guide. The timing was perfect, I completed it march 4th just as my package from England arrived.
The organ was finished about the first of May, but that is another story, and hopefully a video of it will get posted one of these days.

"Fancy Calipers"

One day while looking through an 1897 issue of the Sears Roebuck catalog I ran across a listing for some fancy calipers. They looked pretty handy and the price seemed very reasonable at 8 cents, but Sears, for some reason would not honor the order. Perhaps that catalog was too far out of date. Rather than go without I proceeded to make a pair of my own. I finished them February 22, and I was pleasantly surprised how well they work. Those "old timers" knew what they were doing!

Tool Post Grinder


When building the Gator gun in January I took an old 3/8" worn reamer and ground it down to .360 diameter so I could ream the barrel to 36 caliber. To grind it down I rigged a die grinder to the lathe tool post. It got the job done, but the setup was a little less than satisfactory, so that prompted building a solid tool post grinder of my own design. It was constructed almost entirely of on hand materials, except I did salvage a motor and speed control from a little Harbor Freight grinder. It was completed February 4th.

January was a busy month




After being under construction for 10 weeks, on January 9th 2009, a half scale model of a Winchester Model 1892 was completed. It is fully functional, just like a full sized one, except it cannot be shot because there are no bullets commercially available that will work in it. This is the same model as so often was used in John Wayne and Chuck Connors movies.






On January 21 a rather whimsical under hammer muzzle loading pistol was completed. I call it my Gator Gun, and by golly it has proved to be pretty effective. I have not seen a single Gator in the whole county since it was finished






The month was finished up on the 29th of January by completing a mini .22 caliber revolver. It is fully functional, but it was decommissioned so that it will not shoot bullets. I did not want to take a chance of someone getting hurt with it.

Sunday, November 16, 2008

Bimba Too



After building so many engines a person starts to look for something different and unusual. A geared engine seemed to fit the bill. I have only seen one actual model, plus pictures of a couple others. I understand that they were patented by a fellow named Murray in 1908, but I have no knowledge if they were ever manufactured.
The engine employs a planetary gearing system. A point on the pitch line of the small hear generates a perfectly straight line from side to side, this eliminating the need for a cross head and connecting rod. The piston rod connects directly at that point.
This is just one of several model engines that I have built using surplus Bimba Brand pneumatic cylinders, and that is where the name came from. To add interest, it is equipped with a chain driven rotary valve and painted gaudy contrasting colors. Hope you like it.

Watch it in Action.

Paddle Wheel Engine




The reason for building this model is that it has a valve operating mechanism that is a little different than the usual for a steam engine. The cam is forward, operated from linkages fastened to the connecting rod which keeps it out of the splash area of the wheel. Also it incorporates a triangular shaped cam, that provides a rather quick motion to the valve at each end of the stroke. Another peculiar thing about the cam is that it has such a shape that it maintains contact with both sides of the cam follower at all times.
The first 2 pictures show the cams in the process of being machined. The third picture is the finished cams in their followers prior to installation. The forth picture shows the finished model. This is not a scale model of an actual engine, it is just to demonstrate the valve motion.


And here is a little video of it running

Saturday, November 1, 2008

Oil Field Pump Video

Oil Field Pump


In this day of high energy costs, I thought it no more that appropriate for me to build an oil field pump, and pump out old cesspools and convert the contents to racing and jet engine fuel. What do you think of that idea?



Friday, August 8, 2008

South Facing Chariot


This afternoon I finished the little Chinese Chariot and everything works just beautiful, so smooth and easy. Just not very accurately. If it headed down a fairly straight road that turned only slightly right and left, it would maintain an accurate pointing of south. But when I designed the gear train I had my brain turned off, and put a 3 to 1 reduction in the gear train thinking they would not have to turn so fast, and that ratio fit real good. Therefore the little pointing man only compensates 1/3rd as much as he should. If the Chariot makes a complete 360 degree turn around, he only turns 120 degrees, so the Chariot would have to turn three complete turns to get him pointing south again. Talk about confusion!
Anyway it makes a good static display and all the principal parts are there. If I wanted it to work accurately, I suppose I could put some 1/3 size wheels on it, but then it would look pretty funny, and probably high center on a rock.
By the way the pointer man is a genuine Chinaman. It says "Made in China" on the bottom of one foot.
Birk

Here are some pictures of the build.


Sunday, July 13, 2008

Ride in the Wind

A long time ago, somewhere around 500 years, some guy by the name of Leonardo was inventing all sorts of unheard of (at that time) things. In his illustrations he used peg toothed gears. They looked so intriguing, and I've wanted to try building some for as long time. I finally got around to doing it a couple weeks ago. For the body I used 3/8" aluminum, and in one I put 1/4" brass pegs and in the other stainless. Dissimilar metals usually wear better. Shown below are the results.

As with all new things, there are things to be learned, and I learned they need to be properly meshed. In some positions they would hardly run against each other, and in other positions they ran almost as smooth as machine cut gears.
The final use for the gears was in another wind sculpture for the yard to amuse people, as can be seen below.


It is simply an assemblage of used parts, painted some gaudy colors. The rotor turns a shaft that extends down and operates the peg gears, that in turn operate the pedals. The head is fastened to the shaft so it turns with the rotor, and it has a face on both sides so it does a lot of looking around. It is not very normal, but then not much else around here is either, so what the heck.

Birk

Friday, June 27, 2008

Birk BBQ

A few weeks ago I put up a post about casting aluminum with Birk. Well, he fired up the furnace once again, but for a totally different purpose. Birk heard that one of my 5 year old sons "fun" ideas for summer was to have the whole family visit Birk. Sounds fun to me. So, Birk thought he would invite us over for a little BBQ. He told Max, my son, that he could cook them on the furnace. Max was thrilled and said we could cast stuff and cook hot dogs at the same time. Here are some photos of the fun. The forge was a little hot at first. The dogs were cooking fast-- almost like putting them into a jet engine, but he dialed back the heat and it worked great. If you're looking for a new use for your furnace, I highly recomend it. Maybe next time we'll do rotisserie chicken on the lathe.

Guy




Sunday, June 15, 2008

Fathers Day

Here it is Father's Day again. Perhaps You would like to see a picture of my Father's Day Fishing Pole?

It was stuck on the side of the barn, and before long a flying fish got hooked. Now that might sound like a "fish story" but here is a picture to prove it!

All you fathers and prospective fathers have a good Father's Day, OK.

Day of casting

One of my nephews and my kids and I got to visit Birk the other day and he showed us the ropes of casting aluminum. It was a great afternoon. Here are some photos and video of the day.

Thanks Birk!!
Guy









You can also see the final results of one of the castings here: http://maxbuilds.blogspot.com/2008/06/little-engine.html

Out of work

Yesterday I completed an automaton of a little shoemaker, so now I'm out of work AGAIN! That is the hard part of life, thinking up something new to do.


The helical cam that moves the arms and head back and forth, was machined using my homemade helical attachment.


Here he is in action.

Sunday, May 18, 2008

Wrong Color

After taking a year, the model Bucyrus steam shovel finally took it's display place in the showroom this weekend. I'm almost certain it is the wrong color, but at least it is photogenic. I would suspect that the originals were dull black or something like that, but I'm not worried because there are not too many people around that can remember that far back.
Several days ago my little friend, Max, "Kactiguy's" 5 year old son, was here visiting. He told me that I should put pieces of candy and brass in the bucket, so when he came I could pull the trip rope and dump them out for him. Even at his age he knows that brass is good material to build neat things out of. Who said that the younger generation is not taking an interest in our hobby?



And yes I do have some candy and brass in the bucket for the next time Max comes to visit!
Birk

Tuesday, April 29, 2008

Antique Clock Replica

Sooner or later it seems that most hobby machinists have to fulfill a need to build a clock. Not because they need one, but because need to satisfy the desire to prove to themselves that they can do it.
Over the years I had accumulated numerous plans that were available, but somehow I do not get much satisfaction from building something from someone else's plan, I'd rather do my own thing. That is not saying that I do not glean ideas from others, because I do that a lot, and sometimes modify them to fit my own needs.
For the clock, I finally went to the library and got a book on old clocks. I picked a small one with a picture that showed a good representation of the working parts and went from there.

There was no way of telling what size it was so I just guessed. It was pretty easy to estimate how many teeth in the gears, etc. so it was not all that difficult to make a scale drawing. According to the book the clock was built about 500 years ago, and perhaps that is before they had invented screws, because there are none in it. Everything is either riveted or fastened with tapered pins. At first I thought "how awkward", but it turned out to be every bit as easy as using screws.

There are a few changes in the design of my clock and the original. Mine has a little dragon rather than a bird to support the foliot or balance that controls the speed, which hangs by a thread. It keeps fairly accurate time, except it is different that modern clocks. There is only one hand, that takes two hours to make a revolution. My only guess is that 500 years ago they were still using hour glasses, and perhaps they had not standardized on the 12 hour dial as we now know.
Anyway it turned out to be a very satisfying project.
Birk

Wednesday, April 23, 2008

Mowing Season

Can you believe that after a long cold winter we are fast approaching the lawn mowing season. I have been so envious of those people with riding lawn mowers. Riding lawn mowers are expensive, however I have the skills that I used to build my own "Self Powered Riding Lawn Mower".

Now, I am the envy of all those "push mower" people.
Birk

Thursday, April 17, 2008

Elevator

Most people as they grow older go through a period called a second childhood, But not me, I do not have to worry about anything like that. I have not grown out of my first childhood yet. When my body was little I had a toy elevator that was lots of fun, but it was cheaply built out of tin can type material and did not last. I was longing for that toy, so recently I constructed a replacement as near as I could recall. It is not exactly the same, as 70 years is a long time to remember something. The original used large glass marbles. I think they were called a taw. The reproduction uses 3/4" steel ball bearings. A release mechanism releases one at a time into the elevator car which travels to the bottom and is dumped out. Then it returns to the top for another one. There is a propeller on the pulley shaft powered by a one way clutch out of a computer printer that adds a little commotion.







It will keep running as long as there are balls on the feed chute, so it is a lot of fun for kids to keep putting them back up there.
The problem I have with it is that whenever our great-grand kids come to visit, they always want to play with the elevator, and they do not want to let me have "my" turn!

Oh, and by the way I got a corrugated roof formed and shaped for the steam shovel yesterday, although it is not fastened down yet.

I do not know if roofs were to provide protection from sun or storm, but either way I'm almost ready.
Birk